The Vega 1 is a dual-channel camera built in a compact case. With its powerful design, Vega 1 can read the number plate on 200km/h vehicle from 25 meters away as well as streaming visible video 24/7 simultaneously. The high sensitivity image sensor is installed for ANPR reading, video streaming in extremely low light conditions. Thanks to its local storage, the video is well restored even if the network connectivity is no longer available. The superb Vega 1 is suitable for single lane vehicle tracking, traffic limited areas, and priority lanes.
The SA-FIX W camera housing is a rugged corrosion proof camera housing designed for use in onshore, offshore, marine and heavy industrial environments. The camera housing is constructed from electro-polished 316L stainless steel for maximum corrosion protection and is fitted with an 316L sun-shield, a thermostatically controlled heater element, and a integrated wiper. The housing is not sold separately, it is only available in combination with a Siqura daylight camera module, such as the BC822v2H3-AS, and an interface (INT-RJ/SM/MM).
1. Support Windows 10 OS
2. Support all sizes of standard of USB3.0
3. Support Ublox GPS High precision positioning, dual frequency WIFI
4. Support 2D Scan
5. Support Electronic compass, gyroscope, Hall sensor
6. Rugged IP65 protection level
7. Support 5000mAh removeable battery
8. Support high strength Glass Touch Panel,handwriting input
9. Support RJ45 internet access
10. Support keyboard
The EXB3200 are medium duty enclosure mounts designed for applications where mounting on a pipe or pole is necessary. These mounts can be used with Universal enclosures having a 2-inch (5.08 cm) mounting hole pattern and are capable of supporting up to 40 lb (18.14 kg). All three mounts feature a manually adjustable swivel head and a cable feedthrough hole to conceal wiring.
The JB2200 are medium duty enclosure mounts designed for applications where mounting on a pipe or pole is necessary. These mounts can be used with Universal enclosures having a 2-inch (5.08 cm) mounting hole pattern and are capable of supporting up to 40 lb (18.14 kg). All three mounts feature a manually adjustable swivel head and a cable feedthrough hole to conceal wiring. Multiple mounting holes on the tilt table provide maximum 360-degree horizontal positioning of the enclosure.
A UTF (Up the FiberTM) transmitter (TX) converts a composite video signal into a high-quality, 9-bit digitized optical equivalent and transmits this over optical fiber. Additionally, the transmitter provides a voltage-free alarm contact (normally open) for e.g. door contacts, anti-tamper contacts etc. Complementary UTF receivers (RX) will receive and convert the optical signal to video/contact closure. TX and RX models operate over one single-mode optical fiber. TX-2 and RX-2 models are dual units, operating over two single-mode optical fibers. All models use one transmission wavelength (1310 nm).
Security isn’t just a matter of buying the right hardware. It is about using that hardware to its full potential. But how to make the most of what you have? VDG Sense is a state-of-the-art video management system (VMS) that consolidates your surveillance equipment into a single seamless solution, giving you the tools you need to act quickly and efficiently.
Washer Tank & Pump for Siqura TrafficPTZ and TFHx cameras.
The Siqura® SA-WP10-10m-VSF 24 (v2) is a wash kit consisting of a water tank with an integrated pump for TrafficPTZ cameras and TFHx fixed housings.
This washer tank has a capacity of 10 liters and delivery head up to 10 meters.
With the use of the antifreeze liquid the minimum operating temperature goes down to -25°C (13°F).
The unique Siqura S-60 E video server combines H.264 video
encoding with MPEG-4 or MJPEG. It offers an open, costeffective solution for IP video CCTV applications. The S-60 E
features high quality H.264 and MPEG-4 streaming video, low
bandwidth, low latency, and interoperability with most other
The SA-BC1103 F is a 3 Megapixel HD IP camera built in a fixed housing designed for use in onshore, offshore, marine and heavy industrial environments. The camera housing is constructed from electro-polished 316L stainless steel for maximum corrosion protection and is fitted as standard with sunshield and a thermostatically controlled heater element. The camera can optionally be fitted with a wiper, washer tank and direct to optical fiber cable.
Lenel offers a Dual Reader Interface (DRI) module for access
control solutions. Most access control card readers, keypads,
or readers with keypads that use standard Wiegand Data1/
Data0 or Clock/Data communication are supported, as are
those that support the bidirectional RS-485 Open Supervised
Device Protocol (OSDP™). Lock, unlock, and facility code offline
access modes are supported on all readers connected to the
DRI. Each DRI supports up to 16 different card formats as well
as issue codes for both magnetic and Wiegand card formats.
XSNet™ 3300MC SFP - 10/100/1000Base-TX to FX SFP Media Converter
The versatile XSNet™ 3300MC media converter series offers
cost-effective solutions for optical LAN and WAN networks.
XSNet™ 3300MC modules are plug-and-play for easy
installation, featuring autonegotiation and auto-MDI/MDIX
WP4-BC840M04 all-weather outdoor housing offers robust and easy, secure installation. It is operated by AC24V and has the direct power to the installed box camera. The IK10-, IP66- rated casing protects against water and dust in all weather conditions. With an anti-drop design, it enables easy and secure installation without spare screws. The housing operates in a wide temperature range, from -30 °C to +75 °C. To prevent ice or condensation from forming on the optical window, the housing comes with a built-in heater and blower. External IR illuminator is offered as an option and it can easily snap-in to housing without additional cables.
The SA-BC36 F is a 36x zoom analogue camera built
in a fixed camera housing designed for use in
onshore, offshore, marine and heavy industrial
environments. The camera housing is constructed
from electro-polished 316L stainless steel for
maximum corrosion protection and is fitted as
standard with sunshield and thermostatically
controlled heater element. Optionally the camera can
be connected direct to optical fiber.